The CaseLube™ Safety Data Sheet (SDS) contains regulatory hazard classifications, transport information (UN1219), flash point data, handling precautions, and first-aid measures for this flammable liquid graphite lubricant.
CaseLube™
Colloidal Graphite Case Neck Lubricant
Prepared in accordance with OSHA Hazard Communication Standard (29 CFR 1910.1200)
SECTION 1: Identification
Product Identifier: CaseLube™
Product Type: Dry Film Lubricant
Recommended Use: Colloidal graphite lubricant for cartridge case necks, projectile applications, and precision metal-to-metal lubrication.
Restrictions on Use: For professional and industrial use only. Not intended for cosmetic or personal care use.
Manufacturer/Supplier:
Huron Industries Inc.
2301 16th Street, Port Huron, MI 48060 USA
Phone: 810-984-4213
Email: orders@huronindustries.com
Website: https://huronindustries.com
Emergency Telephone: Contact local emergency services or CHEMTREC (if enrolled).
SECTION 2: Hazard Identification
Classification (GHS – United States)
- Flammable Liquid – Category 1
- Skin Irritation – Category 2
- Eye Irritation – Category 2A
- Skin Sensitization – Category 1
- Specific Target Organ Toxicity (Single Exposure) – Category 3
- Aspiration Hazard – Category 1
Signal Word
Danger
Hazard Statements
- Extremely flammable liquid and vapor.
- Causes skin irritation.
- Causes serious eye irritation.
- May cause allergic skin reaction.
- May cause drowsiness or dizziness.
- May be fatal if swallowed and enters airways.
Precautionary Statements
Prevention
- Keep away from heat, sparks, open flames, and hot surfaces. No smoking.
- Avoid breathing vapors. Use only in a well-ventilated area.
- Wear protective gloves and eye protection.
Response
- IF ON SKIN: Wash with soap and water.
- IF IN EYES: Rinse cautiously with water for several minutes.
- IF INHALED: Remove to fresh air and keep comfortable for breathing.
- IF SWALLOWED: Immediately call a poison center or physician. Do NOT induce vomiting.
- In case of fire: Use dry chemical, foam, or carbon dioxide.
Storage
- Store in a cool, well-ventilated place. Keep container tightly closed.
Disposal
- Dispose of contents and container in accordance with federal, state, and local regulations.
SECTION 3: Composition / Information on Ingredients
| Component | CAS Number | Concentration |
|---|---|---|
| 2-Propanol (Isopropanol) | 67-63-0 | 60–100% |
| Graphite | 7782-42-5 | 1–5% |
| Thermoplastic Resin | Proprietary | <5% |
SECTION 4: First-Aid Measures
- Inhalation: Move to fresh air. Seek medical attention if symptoms persist.
- Ingestion: Do NOT induce vomiting. Call a Poison Center or physician immediately.
- Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses if present. Seek medical attention if irritation persists.
- Skin Contact: Wash thoroughly with soap and water. Remove contaminated clothing.
SECTION 5: Fire-Fighting Measures
- Suitable Extinguishing Media: Water spray (fog), foam, dry chemical, carbon dioxide.
- Specific Hazards: Vapors may form explosive mixtures with air.
- Protective Equipment: Firefighters should wear full protective gear and self-contained breathing apparatus.
SECTION 6: Accidental Release Measures
- Eliminate all ignition sources. Provide adequate ventilation.
- Absorb with inert material (sand, vermiculite).
- Dispose according to applicable regulations.
SECTION 7: Handling and Storage
- Handling: Avoid contact with skin and eyes. Avoid breathing vapors. Use in well-ventilated area. Keep away from ignition sources.
- Storage: Store below 90°F (32°C) in a tightly closed container. Protect from heat and direct sunlight.
SECTION 8: Exposure Controls / Personal Protection
- Engineering Controls: Use local exhaust ventilation if needed.
- Respiratory Protection: Use NIOSH-approved respirator if exposure limits are exceeded.
- Eye Protection: Chemical safety goggles.
- Skin Protection: Impervious gloves.
SECTION 9: Physical and Chemical Properties
- Physical State: Liquid
- Color: Black
- Odor: Alcohol
- Flash Point: 11.1°C (51.98°F)
- Boiling Point: >35°C (>95°F)
- Auto-Ignition Temperature: >398°C (>748°F)
- Flammable Limits: 2% (Lower), 12% (Upper)
- Density: 6.6 lb/gal
- VOC: 766 g/L
SECTION 10: Stability and Reactivity
- Stability: Stable under normal conditions.
- Conditions to Avoid: Heat, sparks, open flames.
- Incompatible Materials: Strong oxidizers.
- Hazardous Decomposition Products: Carbon monoxide, carbon dioxide.
SECTION 11: Toxicological Information
May cause irritation to skin, eyes, and respiratory tract.
Excessive inhalation may cause headache, dizziness, or nausea.
SECTION 12: Ecological Information
No specific data available.
SECTION 13: Disposal Considerations
Dispose in accordance with local, state, and federal regulations.
SECTION 14: Transport Information
- Proper Shipping Name: Isopropanol
- UN Number: UN1219
- Hazard Class: 3
- Packing Group: II
SECTION 15: Regulatory Information
All components are listed or exempt from listing on the TSCA Inventory.
This product does not contain chemicals known to the State of California to cause cancer or reproductive harm.
SECTION 16: Other Information
Prepared for CaseLube™ branding.
This SDS is provided for informational purposes and is believed to be accurate. Huron Industries Inc. disclaims all warranties and liability arising from use of this product.