NEOSAFE® All-Purpose – Safety Datasheet (SDS)

Technical Datasheets (TDS)

NEOSAFE® Max – Technical Datasheet (TDS)

NEOSAFE® Plus – Technical Datasheet (TDS)

NEOSAFE® All-Purpose – Technical Datasheet (TDS)

Safety Datasheets (SDS)

NEOSAFE® Max – Safety Datasheet (SDS)

NEOSAFE® Plus – Safety Datasheet (SDS)

NEOSAFE® All-Purpose – Safety Datasheet (SDS)

Safety Datasheet

NEOSAFE® All-Purpose – Oil and Fuel Cleanup Sorbent

Identification

  • Product Name: NEOSAFE® All-Purpose
  • Product Type: Oil and Fuel Cleanup Sorbent
  • Recommended Use: Industrial and general spill cleanup and slip hazard reduction
  • Region: United States
  • Company: Huron Industries, Inc.
  • Company Address: 2301 16th Street, Port Huron, MI 48060
  • Company Phone Number: 810-984-4213
  • Company Fax Number: 810-987-4199
  • Email: orders@huronindustries.com
  • Website: https://huronindustries.com/
  • Emergency Response: INFOTRAC: 800-535-5053 (Domestic – Huron 89770), +1-352-323-3500 (International – Huron 89770)

Hazard Identification

Emergency Overview

  • This product is not considered hazardous as defined under the OSHA Hazard Communication Standard 29 CFR 1910.1200.
  • Dust generated during use may cause mechanical irritation.
  • Avoid breathing dust and prolonged contact with eyes or skin.

Hazard Classification

  • No GHS classifications apply to this product at the current time.

Precautionary Statements

Prevention

  • Avoid breathing dust.
  • Avoid contact with eyes, skin, and clothing.
  • Wash thoroughly with soap and water after handling.
  • Use only with adequate ventilation.
  • Minimize the generation and accumulation of dust.
  • Follow good housekeeping practices to prevent dust buildup.

Response

  • If inhaled: Remove to fresh air. Get medical attention if symptoms persist.
  • If in eyes: Hold eyelids apart and flush with water for at least 15 minutes. Seek medical attention.
  • If on skin: Wash affected area thoroughly with water. Seek medical attention if irritation persists.
  • If swallowed: Do NOT induce vomiting. Seek immediate medical attention.

Storage

  • Store in a cool, dry, well-ventilated environment.
  • Keep container tightly closed when not in use.

Disposal

  • Dispose of contents and containers in accordance with local, state, and federal environmental regulations.
  • Used material may be regulated depending on the substance absorbed.

Composition / Information on Ingredients

  • Perlite (CAS 93763-70-3): >60%
  • Epoxy Polymer: 30–48%
  • Amorphous Silicate-Based Glass (CAS 65997-17-3): 3–20%

First-Aid Measures

  • Inhalation: Remove to fresh air. Seek medical attention if symptoms persist.
  • Eye Contact: Flush eyes with water for at least 15 minutes. Get medical attention.
  • Skin Contact: Wash thoroughly with water. Seek medical attention if irritation persists.
  • Ingestion: Do NOT induce vomiting. Seek immediate medical attention.

Firefighting Measures

  • Extinguishing Media: Water Spray, Carbon Dioxide, Dry Chemical, or Foam.
  • Special Firefighting Procedures: Firefighters should wear self-contained breathing apparatus.
  • Unusual Fire or Explosion Hazards: Product may ignite when exposed to flames. Dense, irritating smoke may be produced under extreme heat.

Handling and Storage

  • Handling: Avoid breathing dust. Avoid contact with eyes, skin, and clothing. Wash thoroughly after use.
  • Storage: Store in a cool, dry location. Shelf life is indefinite when stored properly.

Disclaimer

This safety datasheet is provided for informational purposes only and is believed to be reliable. Huron Industries, Inc. does not assume responsibility for results obtained by users over whose methods it has no control. The user is responsible for determining suitability for a particular purpose. Huron Industries, Inc. disclaims all warranties, expressed or implied, including merchantability and fitness for a particular purpose.

NEOSAFE® is a Trademark of Huron Industries, Inc.